Support

CASE: If you update the Firmware then got the display of abnormal as below

1. The first method, You may try to adjust the display through the OSD Menu: press “KS-AUTO1”

It will auto tune the display and appear the dialog as below

2. If it still can not get correct position,the second method, please try to manually adjust it. To press “KS-MENU1”

It will appear the dialog:

2.1 Press “KS-RIGHT1” 2 times

Then select “Position” as below :

2.2 Press “KS-Menu1” into Position

Shown the dialog as below:

2.3 Press "KS-MENU1” select “H. Position”

The dialog will appear the value as below:

2.4 Press “KS-LEFT1” button to move the display to left side:

Then you can move the display to left side for correct position.

Press “KS-AUTO1” button exit or up the MENU.

PS. KS-LEFT1 : up or left side, and KS-RIGHT1 : down or right side